1, straw grinder should be fixed on the ground, can be fixed with cement.
2, the timber mill in the work carried out before the machine before starting the test machine is a simple rotation of the spindle bearings to see whether the normal operation, the gap between the components pre-installation seed oil press the firm and check the foundation is stable, as installed on the basic stereotypes, reinstall the timber mill, then more waste of time, the material is a waste;
3, shredders and motor to be mounted on the machine base is made with angle.
4, wood flour machine starts operating timber mill to the attention placed on your machine and machine for pellets, lumber mill test machine to see if the reverse, put less material fineness finished processing them to see whether the target customers to buy lumber mill after returning home in time to put the test machine installed when you try to wait for the previous one timber full of wood and then put into the feed inlet second block, in order to avoid situations card machine.