Popular Search:  oil press  |  pellet mill machine        
Home
About Us
Product
News
Certificate
Download
Video
Online Order
Factory
Contact Us
Products blog link
wire stripping
fruit processing machine
feed mill equipment
oil press
cold press oil machine
cold oil press
food processing equipment
biomass plant
Home > hydraulic oil press > Press common troubleshooting method
Press common troubleshooting method
2013-12-13 by seoer9

1 when no suction pump overhaul , the case of dirt clogging oil network, washable grease filter should be . If the oil is used for a long time , due to sediment adhering to the inlet valve and the valve does not cause adhesion , should be replaced with a new release of oil or old oil filter and clean the inlet valve . If the fuel tank is not enough , add a little oil to the tank can be , if the vacuum pump in the minors , you can pull out the small piston , and crude oil production into the oil pressure .
2 When the pump pressure is insufficient maintenance, if there is dirt or poor sealing valve , after grinding them washable , so close together. Press the case of the inlet valve plug and seat is bad, too polished to be washable , so close together. The case of press out the oil drain plug and valve seat caused by poor contact or tighten the oil spill , may press grinding valve plug and seat aspirant so close together or tighten the plug. The case of a small pump worn piston and the gap is too big , potato peeling machine replaced with new pump.
3 When the cylinder and piston leak repair, if installed the wrong sized cup is due up , press the right approach should be re-installed cups . Cup cracked the case of damage , should be replaced with new cup .

   keywords:    hydraulic oil press
    vegetable oil plants
    machine-for-pellets
    oil-processing
Copyright 2012-2021 @ Henan Name Brand Machinery Co.,Ltd All Right Resrrved          Designed and Developed by www.hoogege.com