Inside, loosening the compression nut, then loosen oil press squeeze cage racks and connector ends with the four M16 connection screws connecting the upper and lower squeeze cage removed 10 M14 Bolts, remove the screw on the cage to the garden rows and rows of rings out.
Removing the oil press of rows: Remove the strip Pai circle at one end with iron bars from the side against a row of hand percussion hammer the other end, one of the Row play, the rest of row is automatically loose down.  Article row assembly method: oil press pellet machines of standing to bring out the tank facing down, put the following piece of wood, the pieces are arranged in neat rows tune of row ring Wall, with deep sump end down. Two similar pieces in front row deep groove surface can not be put together, the last row of the oil processings against the plug with a metal rod Protruding end of the closed beta, hand percussion hammer the other end of the strip row close to the wall, to touch the inner wall without protruding phenomenon so far.