Average speed should be around in 33dmin. Idling gear box to the attention of meshing gears and sound Sound is normal, each bearing parts and the motor is normal. Oil press idling, the motor current should be about 3A. If current is too high, you should stop immediately seized Investigation, adjustment and then boot.
Load is normal, around 50kg ready rapeseed or soy, ready hopper. Note: Food dehydrator start squeezing the feed can not be too fast, otherwise the pressing chamber pressure Sudden increase in the pressing screw shaft can not rotate, causing blockage pressing chamber, and even squeeze cage rupture, a major accident. Thus begins the compression, the feed should be uniform slow Put into the hopper, the oil press for running-in. So repeatedly, sustained more than 3 ~ 4h, the oil press temperature gradually increased, and even take smoke (which is Normal phenomenon). Start squeezing oil mill plants chamber temperature low, slow twist, withered section stud on the handle to increase the thickness of the cake, while increasing the moisture squeezed into billet Until the pressing chamber temperature.